Content on this page requires a newer version of Adobe Flash Player.

Get Adobe Flash player

                                   
     
FrançaisEnglish
 Diagnostic Tools
 .:. BMW
 .:. Vag Group
 .:. Renault
 .:. Fiat
 .:. GM
 .:. Ford
 .:. Multi-mark
 Auto Programmer
 Auto Key Center
 TMPro
Diagnostic Tools > Vag Group
 
Vag-Com 704
 
(2008 NEW VERSION) NEVER LOCKED
 
HEX-CAN-USB

Compatible with the newest cars which require a direct CAN connection for diagnostics including all Golf-5 platform cars and latest Audi A3, A6 and A8,Q7,etc.
Protocol timing indistinguishable from a real VAG/VAS tool. Works reliably even with "difficult" control modules such as the 1991-1994 1Z Audi TDIs and the 1993-1994 Audi 2.6L with Hella ECU. Built-In VAG-Saver functionality -- instantly alerts the user if either the K/K1 line or the L/K2 line is shorted to Ground or Vbatt.
Full support for dual-K lines found in "new" (B6/8E chassis Audi A4 and 2002+ Audi A6,A8,etc.

What is CAN and why is it important?

CAN stands for Controller Area Network. CAN is a new means of communicating with the can for diagnostics used by the latest generations of VW, Audi, SEAT, and Skoda vehicles. Unlike the older ISO9141 system which a used a single K-line for diagnostic communications, the new CAN-Bus system uses a twisted pair of wires with differential signaling. CAN is considerably faster than ISO-9141 (500 kpbs vs. 10.4 kbps). Both new hardware and new software are required in order to communicate with cars using CAN for diagnostics.

Does VAG-COM work with cars that require direct CAN access for diagnostics?

Yes! We have integrated CAN compatibility since the Release 404.0 version of VAG-COM, but as CAN uses different hardware, new interfaces are required in order to communicate with a CAN-based car. These are now available as well. The new HEX-COM+CAN and HEX-USB+CAN interfaces are fully compatible with the new latest cars which require a direct CAN connection.

Features

1.USB connector plugs into most modern laptops!
2.Compatible with the latest cars which require a direct CAN connection for diagnostics including all Golf-5 platform cars and latest Audi A3, A6 and A8.
3.Protocol timing indistinguishable from a real VAG/VAS tool. Works reliably even with "difficult" control modules such as the 1991-1994 1Z Audi TDIs and the 1993-1994 Audi 2.6L with Hella ECU.
4.Built-In VAG-Saver functionality -- instantly alerts the user if either the K/K1 line or the L/K2 line is shorted to Ground or Vbatt.
5.Full support for dual-K lines found in "new" (B6/8E chassis Audi A4 and 2002+ Audi A6 -- no VAS-6017 required -- no manual switches!
6.Fully backwards compatible with older cars using a single K-line or K plus L.
7.Bi-Color (red/green) status/activity LED

The product description

OBDfactory OBDII Can USB with the latest cars which require a direct CAN connection for diagnostics including all Golf-5 platform cars and latest Audi A3, A6 and A8,Q7.
Protocol timing indistinguishable from a real VAG/VAS tool.
The possibility that software is complete is on the xxxxx renewal, function all of, support the car type to 2007.
Diagnostics Type including:
All Golf-5 platform cars (A5 platform) including:
2003+ VW Touran (1T chassis)
2004+ VW Golf (1K chassis)
2004+ VW Caddy (2K chassis)
2004+ Audi A3 (8P chassis)
2004+ Seat Altea (5P chassis)
2004+ Skoda Octavia (1Z chassis)
2005+ Seat Toledo (5P chassis)
2005+ Golf Plus (5M chassis)
2005+ Seat Leon (1P chassis)
2005.5+ Jetta (1K chassis)
2006+ Eos (1F chassis)
2003+ Audi A8 and A8L (D3 platform, 4E chassis)
2005+ Audi A6 (C6 platform, 4F chassis)
2005+ Audi A4 ("B7" platform) (some control modules)
2005.5+ VW Passat (B6 Platform, 3C chassis)
2006+ Audi Q7 (4L chassis)
2007+ Audi R8 (42 chassis)
2007+ Audi TT (8J chassis)
2007+ VW Touareg (7L6 chassis) ("facelift", built after Nov. 30 2006

 

 
AUDI/VW VAS 5052
 
 
Information

The VAS 5052 Tester is offered to the aftermarket in the same specification that is currently supplied to AUDI/VW franchised dealers.
The VAS5052 System and software has been developed and the latter evolved over many years; the system is capable of testing, configuring and reprogramming all VW/AUDI systems from the first engine management released on VW/AUDI for the all model right up to the latest VW/AUDI car with multiple control systems on sale today. It is the definitive AUDI/VW diagnostic tool.

Product Description

VAS 5052 is the special diagnose tool for AUDI/VW vehicle.

VAS 5052 was designed especially for mobile use or to be used as a second or third tester. The tool works with cars belonging to VW Group (SEAT-AUDI-VW-SKODA). 
The scan tool mode of operation allows the prescribed transfer of data within the scope of the European On-Board Diagnosis (E-OBD) from and to exhaust gas influencing control units from all vehicle manufacturers. Service information such as service schedules, current flow diagrams etc (ELSA) are shown on the screen and thus considerably reduce the amount of paper needed for conveying such information. The necessary information is available directly at the vehicle and is very up-to-date.

Product Feature

Design and features: 
PC-based unit with integrated diagnosis assembly group. 
- Modes of operation: Self-diagnosis, OBD and Guided functions. 
- Operation via external worktop mains unit (110V/230V alternating current),vehicle onboard supply network via diagnosis lead or rechargeable battery installed. 
- TFT colour liquid crystal display (touch screen) for control of all functions at the touch of a finger. 
- Interrogating fault memory of all control units, update programming of all control units or resetting service interval display.

Application

Testable system:
Engine A/C ICM 
Transmission SRS Power Window 
Brake Control System Anti-slip Control Clutch 
Diesel oil pump Control system Anti-Theft Key programming 

 
 
 
 
   
 
 
 


 
 

Our Products :

Copyright 2017 NourAutoKey.com, © All right reserved, Desgined by HayaCreative